Digivision - Wall Controller Chassis

Wall Controller Chassis

A range of 19" industrial chassis are available for customers who require a complete wall controller solution. The IPC range can be purchased un-configured or pre-configured with the desired selection of plug-in card options.

IPC 1 (con 7 slot PCI)

The IPC 1 Chassis provides a high performance Pentium 4 processor with 7 free PCI slots. Any combination of Datapath plug in cards can be added to the IPC 1 Chassis (7 cards Maximum).

IPC 1 Specification:

19" 4U Industrial metal chassis
Dimensions (approx) Length 565mm, Height 177mm, Width 482mm
Dual Redundant PSU 350W + 350W
Intel® Pentium 4 3.0 Ghz 800 Mhz FSB
Intel® Hyper-Threading Technology
1Gb of System Memory (upgradeable)
160Gb Hard Drive Fast IDE in removeable caddy
7 x 32 bit 33Mhz PCI Slots
On-board Graphics for control screen
On-board Audio
Ethernet 10/100/1000 LAN
1 x Serial port
4 x USB ports
DVDRW drive
Keyboard and mouse
Floppy drive
Windows XP Professional
24 hour soak test

Options:

Dual IDE 160 +160 RAID
2 Gb of system memory
Additional Gigabit Ethernet card

Download Datasheet (PDF)

<Top>

IPC 1-PRO (con massimo 26 slot PCI)

The IPC 1-PRO is a high specification industrial computer with 2 PCI slots and dual Xeon processors. It provides the ideal solution for any video/data wall controller applications. The IPC1-PRO is also compatible with the IPC-X13 PCI expansion chassis providing a total of 14 free PCI slots. A second expansion chassis may also be added giving a total of 26 PCI slots.

IPC 1-PRO Specification:

19” 4U Industrial Metal case with dual cooling fans
Dimensions (approx) Length 565mm, Height 177mm, Width 482mm
Dual redundant PSU 350W + 350W
Dual Intel® Xeon CPU 3Ghz, 800 Mhz FSB
Intel® Hyper-Threading Technology
1Gb of System Memory (upgradeable)
Dual 160Gb serial ATA Mirrored Hard Drives in removeable caddy
2 x 32bit 33Mhz PCI slots
On-board Audio
Gigabit Ethernet LAN
1 x Parallel Ports
2 x Serial Ports
4 x USB Ports
1 x IEEE 1394 Port
DVDRW drive
Keyboard and mouse
Floppy drive
Windows XP Professional
24 hour soak test

Options:

2 Gb of system memory
Additional Gigabit Ethernet card

Download Datasheet (PDF)

<Top>

IPC-X13 (espansione con 13 slot PCI)

For systems that require more than 7 PCI slots we recommend using the IPC-X13 chassis. This is a general purpose chassis which expands the PCI bus from either the IPC 1 or any standard PC which has a spare PCI slot. The IPC-X13 is supplied with a PCI plug-in card which is installed into the PC requiring expansion. A special 1M cable is then connected between the PC and the IPC-X13. The IPC-X13 has 13 free PCI slots.

By combining the IPC 1 controller with the IPC-X13 a total of 19 PCI slots are available.

IPC-X13 Specification

19" Industrial metal chassis
Dimensions (approx) Length 500mm, Height 177mm, Width 482mm
350 + 350 watt RPSU
13 free full length PCI slots
2 dedicated cooling fans for plug-in cards
PCI card for expanding system PCI bus
1M expansion cable

Download Datasheet (PDF)

<Top>

IPC-X13S (espansione ventilata con 13 slot PCI)

The IPC-X13S provides the same expansion features as the IPC-X13 but with increased airflow for cooling and a larger Redundant PSU. (1350 watt)

The following table shows the maximum recommended number of graphics cards for the IPC-X13 and IPC-X13S chassis, allowing for power and cooling requirements:

	IPC-X13	IPC-X13S
Vantage4	6	12
Vantage4-PRO	6	12
* Vantage4-SIP	3	7
iH4	13	13
iH4-PRO	13	13
* iH4-SIP	7	12
* = Also includes 1 x Mosaic-SQ16

IPC-X13S Specification:

6U Chassis
Dimensions (approx) Length 540mm, Height 265mm, Width 482mm
13 slot PCI expansion
1350 watt Redundant PSU
3 x High flow rate cooling fans
Separate cooling for PSU

Download Datasheet (PDF)

Example of a high end wall controller:

Requirement:

16 display screens
16 composite video inputs
16 Mosaic video Windows with video cross-point switch
8 channels of RGB/VGA capture

Recommended hardware system for above:

1 x IPC 1 fitted with:

4 x VisionRGB-PRO2 capture cards providing 8 channels of RGB capture
1 x PCI expansion card

1 x IPC-X13 fitted with:

4 x iH4-SIP graphics adapters, providing outputs for sixteen displays
1 x MosaicSQ-16 cards providing 16 Mosaic video windows

<Top>

Product Selection: IPC 1, IPC-X13

DIGIVISION can also provide a range of IPC components:

DFI Motherboard Part No: G7V600B-DP
IPC1 Chassis only Part No: IPC1-CASE
PRT PRA 350MV RPSU 350 + 350W Redundant Part No: PRA350MV
Magma 13 slot PCI Expansion backplane Part No: MAGMA13
IPC-X13S chassis only Part No: IPC-X13S-CASE
1350W Redundant PSU Part No: M1W4-6D50P

<Top>

Please contact Digivision (vendite@digivision.it) to discuss your video wall and data wall requirements we will be happy to advise on the appropriate solution for your needs.